May 2021

The final upholstery work, including the seat belt retractor cover and sun visors was completed.

Work was completed on the seats including new knobs for the adjustment lever and the seat back tilt lever.

The brake system was filled and bled.  A small leak was found at the banjo connection which turned out to be a mark on the sealing face.  That was filed out and the brake system were filled again and bled.

The final electric wiring was done, including my radar detector and GPS wiring, and tested.

The exhaust was installed.  The belly pan and other engine panels were prepped and painted.

The new door sill panels were sanded and polished.

The engine was removed and disassembled to resolve the smoke issue.